eigrp stub connected

lab scenario
R2(s0/0.203,ip@6.6.23.2/24)<-->(ip@6.6.23.3/24,s0/0.302)R3
R2 Cisco 2611xm IOS 12.3(12)
R3 Cisco 3640 IOS 12.2(27)
R3 is an eigrp stub router that wants to advertise loopback0(ip@6.6.3.3/32) to R2.

By using "eigrp stub connected" command alone,the connected network won't be adversised to neighbors.It only PERMIT the stub router to send connected routes.

To advetise the directly connected network 6.6.3.3,you have to use "redistribute connected"
under the eigrp process.

router eigrp 2006
redistribute connected
network 6.6.23.0 0.0.0.255
default-metric 1500 100 255 1 1500
no auto-summary
eigrp stub connected
_____
another option is to use network statement to send the connected route to neighbors.
______
Verify

R2#sh ip eigrp nei det
IP-EIGRP neighbors for process 2006
H Address Interface Hold Uptime SRTT RTO Q Seq
(sec) (ms) Cnt Num
0 6.6.23.3 Se0/0.203 10 00:13:18 44 264 0 6
Version 12.2/1.2, Retrans: 1, Retries: 0
Stub Peer Advertising ( CONNECTED SUMMARY ) Routes
Suppressing queries
R2#
R2#sh ip eigrp top
IP-EIGRP Topology Table for AS(2006)/ID(6.6.2.2)

Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - reply Status, s - sia Status

P 6.6.3.3/32, 1 successors, FD is 2297856
via 6.6.132.13 (2297856/128256), Serial0/0.203
P 6.6.23.0/24, 1 successors, FD is 2169856
via Connected, Serial0/0.203
R2#